Craftsman 10IN Band Saw: Specifications, Blade Size, and Parts Support
You own a Craftsman 10IN band saw and you need to know the specifications, blade size, or parts. Craftsman 10IN band saws are mid-size band saws sold by Sears. You need to know the specs, what blade it uses, and where to find parts.
Craftsman 10IN band saws are mid-size band saws sold by Sears under the Craftsman brand. They were manufactured by Emerson Electric and later by TTI. The 10IN saw is larger than the 9-inch benchtop models but smaller than the 12 and 14-inch floor models.
Model Identification
Common Craftsman 10IN Models
| Model Series | Manufacturer | Blade Length | Type | Era |
|---|---|---|---|---|
| 113.243xxx | Emerson Electric | 70-1/2 inches (verify) | 10-inch floor | 1980s to 1990s |
| 113.245xxx | Emerson Electric | 70-1/2 inches (verify) | 10-inch floor | 1990s to 2000s |
| 22401 | TTI | 72 inches (verify) | 10-inch floor | 2000s+ |
| 22402 | TTI | 72 inches (verify) | 10-inch floor | 2000s+ |
How to Identify Your Model
- Find the model number on the label on the saw frame or column.
- If the label is missing, look for a stamped number on the frame.
- Measure the blade length to help identify the model.
- Check the motor label for manufacturer, horsepower, and voltage.
- Look up the model number on Sears Parts Direct or eReplacementParts.
Specifications
| Specification | Value |
|---|---|
| Type | 10-inch floor-standing band saw |
| Throat | 9-1/2 to 10 inches |
| Resaw capacity | 4 to 6 inches (verify by model) |
| Blade length | 70-1/2 to 72 inches (verify by model) |
| Blade width | 1/8 to 1/2 inch |
| Motor | 1/3 to 1/2 HP, 120V |
| Speed | Single speed, ~2500 to 3000 FPM |
| Table | Cast iron or aluminum, ~12 x 12 inches |
| Table tilt | 0 to 45 degrees |
| Weight | ~80 to 150 pounds |
Blade Size
Blade Length
The blade length varies by model. Common lengths are 70-1/2 inches (Emerson models) and 72 inches (TTI models). Measure the old blade or check the manual to verify.
Blade Width
Craftsman 10IN saws accept blades from 1/8 to 1/2 inch wide.
Recommended Blades
| Application | Width | TPI | Material | Cost |
|---|---|---|---|---|
| General woodworking | 1/4 inch | 6 TPI | Carbon steel | 12 to 18 dollars |
| Resawing | 1/2 inch | 3 TPI | Bi-metal M42 | 20 to 30 dollars |
| Curve cutting | 1/4 inch | 6 TPI | Carbon steel | 12 to 18 dollars |
| Scroll work | 1/8 inch | 14 TPI | Carbon steel | 10 to 15 dollars |
Cut Capacity
Throat
The throat is 9-1/2 to 10 inches, meaning you can cut stock up to about 9-1/2 inches wide.
Resaw Capacity
The resaw capacity is 4 to 6 inches, depending on the model.
What It Can Cut
Can cut: Hardwood up to 4 to 6 inches thick. Softwood of any thickness within capacity. Plywood, MDF, and composite materials. Cannot cut: Metal (speed is too fast). Stock wider than 9-1/2 inches.
Common Parts
1. Blades
Compatibility: Any blade of the correct length. Available from Olson Saw, Timber Wolf, and other manufacturers.
2. Tires
Size: 10-inch tires. Type: Urethane recommended. Cost: 15 to 25 dollars per pair.
3. Blade Guides
Type: Metal guide blocks (stock). Can be upgraded to Cool Blocks. Cost: 15 to 20 dollars.
4. Drive Belt
Cost: 10 to 20 dollars.
5. Wheel Bearings
Cost: 15 to 25 dollars per bearing.
6. Switch
Cost: 10 to 20 dollars.
7. Motor
Cost: 100 to 200 dollars.
Where to Find Parts
Sears Parts Direct
Website: searspartsdirect.com How to use: Enter the model number to find parts diagrams and order parts.
eReplacementParts
Website: eReplacementParts.com How to use: Enter the model number to find parts diagrams and order parts.
eBay
How to use: Search for the model number or part description. Availability: Good for used and NOS parts.
Amazon
How to use: Search for generic parts (tires, blades, bearings, belts).
Specialty Suppliers
Olson Saw: Blades and Cool Blocks. Bandsawparts.com: Tires and parts.
Maintenance
Daily: Clean sawdust from table and wheels. Check blade. Weekly: Clean wheel covers. Lubricate guide post. Monthly: Check drive belt tension. Check bolts. Annually: Replace tires if worn. Check bearings. Inspect cord and switch.
FAQ
What blade does the Craftsman 10IN band saw use?
The blade length varies by model. Common lengths are 70-1/2 inches (Emerson models) and 72 inches (TTI models). Measure the old blade or check the manual to verify.
Can I resaw with a Craftsman 10IN band saw?
Yes, with a 1/2 inch, 3 TPI hook tooth bi-metal blade. Resaw capacity is 4 to 6 inches, depending on the model.
Where can I find parts for my Craftsman 10IN band saw?
Sears Parts Direct, eReplacementParts, Amazon, eBay, and specialty suppliers like Olson Saw and Bandsawparts.com.
References
- Sears Parts Direct. “Craftsman 10IN Band Saw Parts.” searspartsdirect.com.
- eReplacementParts. “Craftsman 113.243xxx Parts.” eReplacementParts.com.
- Olson Saw. “70-1/2 Inch Band Saw Blade Guide.” Olson Saw Company.
- Fine Woodworking. “10-Inch Band Saw Setup.” Taunton Press.
- Vintage Machinery. “Craftsman 10-Inch Band Saw Reference.” vintagemachinery.org.
