Delta Band Saw BS100: Specifications, Blade Size, and Parts Support
You own a Delta BS100 band saw and you need to know the specifications, blade size, or parts. The Delta BS100 is a 9-inch benchtop band saw from the Delta ShopMaster line. You need to know the specs, what blade it uses, and where to find parts.
The Delta BS100 is a 9-inch benchtop band saw from the Delta ShopMaster line. It is designed for hobby use and light shop work. The BS100 uses a 59-1/2 inch blade and has a 3-1/2 inch resaw capacity.
Model Identification
Delta 9-Inch Models
| Model | Type | Blade Length | Motor | Notes |
|---|---|---|---|---|
| BS100 (ShopMaster) | 9-inch benchtop | 59-1/2 inches | 1/3 HP | ShopMaster line |
| 28-150 | 9-inch benchtop | 59-1/2 inches | 1/3 HP | Similar to BS100 |
| 28-153 | 9-inch benchtop | 59-1/2 inches | 1/3 HP | Similar to BS100 |
| 28-203 | 9-inch benchtop | 59-1/2 inches | 1/3 HP | Older model |
How to Identify Your Model
- Find the model number on the label on the saw frame.
- If the label is missing, measure the blade length. A 59-1/2 inch blade indicates a 9-inch Delta saw.
- Check the motor label for horsepower and voltage.
- Contact Delta customer service with the model number.
Specifications
| Specification | Value |
|---|---|
| Model | BS100 (ShopMaster) |
| Type | 9-inch benchtop band saw |
| Throat | 8 to 9 inches |
| Resaw capacity | 3-1/2 inches |
| Blade length | 59-1/2 inches |
| Blade width | 1/8 to 3/8 inch |
| Motor | 1/3 HP, 120V |
| Speed | ~2500 FPM (single speed) |
| Table | ~11 x 11 inches |
| Table tilt | 0 to 45 degrees |
| Weight | ~35 to 45 pounds |
Cut Capacity
Throat
The throat is 8 to 9 inches, meaning you can cut stock up to about 8-1/2 inches wide.
Resaw Capacity
The resaw capacity is 3-1/2 inches. This limits the thickness of material you can resaw.
What It Can Cut
Can cut: Hardwood up to 3-1/2 inches thick. Softwood of any thickness within capacity. Plywood, MDF, and composite materials. Cannot cut: Metal (speed is too fast). Stock wider than 8-1/2 inches.
Blade Selection
The Delta BS100 uses a 59-1/2 inch blade.
Recommended Blades
| Application | Width | TPI | Material | Cost |
|---|---|---|---|---|
| General woodworking | 1/4 inch | 6 TPI | Carbon steel | 10 to 15 dollars |
| Curve cutting | 1/8 inch | 14 TPI | Carbon steel | 10 to 12 dollars |
| Ripping | 3/8 inch | 4 TPI | Carbon steel | 12 to 18 dollars |
Cross-Brand Compatibility
The 59-1/2 inch blade is shared with Ryobi 9-inch, WEN 9-inch, Skil 9-inch, Central Machinery 9-inch, and Craftsman 9-inch saws.
Common Parts
1. Blades
Compatibility: Any 59-1/2 inch blade. Available from Olson Saw, Timber Wolf, and other manufacturers.
2. Tires
Size: 9-inch tires. Type: Urethane recommended. Cost: 15 to 25 dollars per pair.
3. Blade Guides
Type: Metal guide blocks (stock). Can be upgraded to Cool Blocks. Cost: 15 to 20 dollars.
4. Drive Belt
Cost: 8 to 15 dollars.
5. Wheel Bearings
Cost: 15 to 25 dollars per bearing.
6. Switch
Cost: 10 to 15 dollars.
7. Motor
Cost: 60 to 120 dollars.
8. Table Insert
Cost: 8 to 15 dollars.
Where to Find Parts
Delta Power Equipment
Contact Delta customer service with the model number.
Aftermarket Suppliers
Olson Saw: Blades and Cool Blocks. Carter Products: Guide upgrades (check compatibility). Industrial bearing suppliers: Standard bearings by bearing number.
Online Retailers
Amazon: Blades, tires, bearings, belts, and switches. eBay: Hard-to-find and discontinued parts. eReplacementParts: Parts diagrams and replacement parts.
Maintenance
Daily: Clean sawdust from table and wheels. Check blade. Weekly: Clean wheel covers. Lubricate guide post. Monthly: Check drive belt tension. Check bolts. Annually: Replace tires if worn. Check bearings. Inspect cord and switch.
FAQ
What blade does the Delta BS100 use?
A 59-1/2 inch blade in widths from 1/8 to 3/8 inch. Carbon steel blades cost 10 to 15 dollars.
Can I resaw with a Delta BS100?
Yes, but with limited capacity. The resaw capacity is 3-1/2 inches. Use a 3/8 inch, 4 TPI skip tooth blade for resawing.
Where can I find parts for my Delta BS100?
Delta Power Equipment, eReplacementParts, Amazon, and eBay. Blades and tires are widely available. Model-specific parts may be harder to find.
References
- Delta Power Equipment. “Delta ShopMaster BS100 Parts.” deltapower.com.
- eReplacementParts. “Delta BS100 Parts Diagram.” eReplacementParts.com.
- Olson Saw. “59-1/2 Inch Band Saw Blade Guide.” Olson Saw Company.
- Fine Woodworking. “Benchtop Band Saw Setup.” Taunton Press.
- Vintage Machinery. “Delta BS100 Reference.” vintagemachinery.org.
