Klutch Band Saw Parts Guide: A Compatibility Guide for Repairs and Restoration
You own a Klutch band saw and you need to find replacement parts. Klutch is a Northern Tool brand, and parts can be challenging to find. You need to know how to identify your model, what parts commonly wear out, and where to find replacements. You need a guide that covers Klutch band saw parts.
Klutch is a brand sold by Northern Tool + Equipment. Band saws sold under this brand include horizontal metal cutting saws and vertical metal cutting saws. Parts availability varies by model, with some parts being easy to find and others requiring aftermarket solutions.
Model Identification
Common Models
| Model | Type | Blade Length | Notes |
|---|---|---|---|
| 4x6 horizontal | Horizontal metal cutting | 64-1/2 inches | Common model |
| 7x12 horizontal | Horizontal metal cutting | 93-1/2 inches (verify) | Larger model |
| 5x8 horizontal | Horizontal metal cutting | 64-1/2 inches (verify) | Mid-size |
| Vertical metal | Vertical metal cutting | Varies | Less common |
How to Identify Your Model
- Find the model number on the label on the saw frame.
- If the label is missing, measure the blade length to identify the saw size.
- Check the motor label for horsepower and voltage.
- Contact Northern Tool customer service with the model number.
Common Wear Parts
1. Blades
The most frequently replaced part.
How to choose: Match the blade length to your saw. Choose the width, TPI, and material based on your work.
Compatibility: Blades are interchangeable between saws that use the same length. A 64-1/2 inch blade fits any 4x6 horizontal saw that uses that length, regardless of brand.
2. Blade Guides
Guides that keep the blade running straight.
How to choose: Match the guide type to your saw model.
Compatibility: Model-specific. Check the parts diagram or measure the old guides.
3. Drive Belt
The belt connecting the motor to the transmission.
How to choose: Match the belt type and length to your saw.
Compatibility: Model-specific. Measure the old belt.
Cost: 10 to 20 dollars.
4. Wheel Bearings
Bearings in the blade wheels.
How to choose: Read the bearing number on the old bearing.
Compatibility: Model-specific. Read the bearing number.
Cost: 15 to 30 dollars per bearing.
5. Coolant Pump
The pump that circulates coolant to the blade.
How to choose: Match the pump type to your saw model.
Compatibility: Model-specific.
Cost: 30 to 80 dollars.
6. Vise Jaws
The jaws that hold the material during cutting.
How to choose: Match the jaw size to your vise.
Compatibility: Model-specific.
Cost: 15 to 30 dollars per pair.
7. Motor
The drive motor.
How to choose: Match the horsepower, voltage, and frame size.
Compatibility: Model-specific. Check the motor label.
Cost: 80 to 200 dollars.
8. Switch
The power switch.
How to choose: Match the switch type and rating to your saw.
Compatibility: Model-specific.
Cost: 10 to 20 dollars.
Where to Find Parts
Northern Tool + Equipment
The first stop for Klutch parts. Contact customer service with the model number. Some parts may be available directly from Northern Tool.
Aftermarket Suppliers
Olson Saw: Blades for all common lengths. Industrial bearing suppliers: Standard bearings by bearing number. Belt suppliers: Standard belts by belt number. Coolant suppliers: Cutting fluid and replacement pumps.
Online Retailers
Amazon: Blades, bearings, belts, and some common parts. eBay: Hard-to-find and discontinued parts. Specialty metalworking suppliers: Blades and guides.
Generic Replacements
Many Klutch parts use standard sizes that can be sourced from industrial suppliers:
- Bearings: By bearing number (e.g., 6203, 6204).
- Belts: By belt number (e.g., A-section V-belt).
- Blades: By blade length.
- Switches: By amperage rating.
- Coolant pumps: By flow rate and mounting.
Blade Selection
4x6 Horizontal (64-1/2 Inch Blade)
General metal cutting: 10/14 variable pitch, bi-metal M42. Cost: about 20 dollars. Thick material: 6 to 8 TPI, bi-metal M42. Cost: about 20 dollars. Thin material: 14 TPI, bi-metal M42. Cost: about 20 dollars.
7x12 Horizontal (93-1/2 Inch Blade, verify)
General metal cutting: 10/14 variable pitch, bi-metal M42. Cost: about 25 dollars. Thick material: 6 to 8 TPI, bi-metal M42. Cost: about 25 dollars.
Maintenance Tips
Daily: Clean chips from the vise, blade, and coolant tray. Check blade for wear. Weekly: Clean the blade wheel covers inside. Check coolant level and concentration. Monthly: Check drive belt tension. Check all bolts for tightness. Lubricate the vise lead screw. Annually: Replace coolant. Check wheel bearings. Inspect electrical cord and switch. Check vise jaw alignment.
Restoration Tips
Clean everything. Disassemble the saw, clean all parts, and remove old coolant, chips, and grease.
Replace the blade. A new bi-metal M42 blade makes a big difference in cut quality.
Check the vise. Make sure the vise jaws are square and hold material securely.
Check the coolant system. Clean the coolant tank, replace old coolant, and check the pump.
Check the drive belt. Replace if cracked or stretched.
FAQ
Where can I find parts for my Klutch band saw?
Northern Tool customer service (contact with model number), aftermarket suppliers like Olson Saw, industrial bearing and belt suppliers, Amazon, and eBay for discontinued parts.
Are Klutch band saw parts interchangeable with other brands?
Blades are interchangeable with any saw using the same length. Bearings, belts, and switches can be replaced with standard industrial parts by part number. Guides and other model-specific parts may not be interchangeable.
How do I identify my Klutch band saw model?
Find the model number on the label on the saw frame. If the label is missing, measure the blade length to identify the saw size, then contact Northern Tool customer service.
What blade should I use for my Klutch 4x6 horizontal band saw?
A 64-1/2 inch bi-metal M42 blade. 10/14 variable pitch for general cutting, 6 to 8 TPI for thick material, 14 TPI for thin material.
References
- Northern Tool + Equipment. “Klutch Band Saw Parts.” northerntool.com.
- Olson Saw. “Band Saw Blade Guide.” Olson Saw Company.
- Practical Machinist. “Horizontal Band Saw Tips.” practicalmachinist.com.
- eReplacementParts. “Band Saw Parts Reference.” eReplacementParts.com.
- Modern Machine Shop. “Horizontal Band Saw Maintenance.” Gardner Business Media.
