Craftsman 12-Inch Band Saw Diagram Parts Guide: A Compatibility Guide for Repairs and Restoration
You own a Craftsman 12-inch band saw and you need to find replacement parts. You want to use a parts diagram to identify the parts you need. Craftsman 12-inch band saws have been made in several models, and parts are not always interchangeable. You need to know the model number, how to read the parts diagram, and where to find the parts.
The Craftsman 12-inch band saw has been sold under several model numbers over the years. Each model has a parts diagram that shows every component with a part number. To find the right parts, you need the model number and the parts diagram.
Model Identification
Common 12-Inch Models
| Model | Manufacturer | Blade Length | Notes |
|---|---|---|---|
| 113.248510 | Emerson Electric | 80 inches | Most common 12-inch Craftsman |
| 113.248512 | Emerson Electric | 80 inches | Similar to 248510 |
| 113.248513 | Emerson Electric | 80 inches | Similar to 248510 |
| 137.216360 | TTI | 80 inches (verify) | Newer model |
How to Identify Your Model
- Find the model number. Look on the label on the saw frame or column. The model number is usually in the format 113.XXXXXX or 137.XXXXXX.
- If the label is missing, look for the serial number. The serial number can sometimes be used to identify the model.
- Measure the blade length. An 80-inch blade indicates a 12-inch Craftsman.
- Check the motor. Read the motor label for horsepower, voltage, and amperage.
- Look up the model number. Search on Sears Parts Direct or eReplacementParts.
Reading the Parts Diagram
How to Use a Parts Diagram
- Find your model number. You need the exact model number to find the correct diagram.
- Go to Sears Parts Direct. Enter the model number to see the parts diagram.
- Identify the part. Look at the diagram and find the part you need to replace.
- Note the part number. Each part on the diagram has a number. This is the number you need to order.
- Check availability. Some parts may be discontinued. Check if the part is in stock or if an aftermarket alternative is available.
Key Parts on the Diagram
Frame and Column
The main structural components. These rarely need replacement unless the saw is damaged.
Parts to look for: Frame assembly, column, base.
Wheels
The upper and lower wheels that the blade runs on.
Parts to look for: Upper wheel, lower wheel, wheel tires, wheel bearings, wheel shaft.
Common replacements: Tires (crack and harden), bearings (wear and get noisy).
Blade Guides
The guides that keep the blade running straight.
Parts to look for: Upper guide assembly, lower guide assembly, guide blocks, thrust bearings, guide post.
Common replacements: Guide blocks (wear and groove), thrust bearings (wear and get noisy), guide post (corrodes and sticks).
Table Assembly
The table that supports the workpiece.
Parts to look for: Table, table insert, trunnion, trunnion lock, tilt scale.
Common replacements: Table insert (lost or damaged), trunnion (worn or damaged).
Drive System
The motor, belt, and pulleys that drive the blade.
Parts to look for: Motor, drive belt, motor pulley, wheel pulley, motor mount.
Common replacements: Drive belt (stretches and cracks), motor (burns out), motor mount (vibrates loose).
Tension and Tracking
The mechanisms that control blade tension and tracking.
Parts to look for: Tension knob, tension spring, tracking knob, tracking adjustment screw.
Common replacements: Tension spring (loses tension), tracking knob (stripped).
Fence and Miter Gauge
The accessories for straight and angled cuts.
Parts to look for: Fence, fence rail, miter gauge, miter gauge bar.
Common replacements: Often lost or missing. Aftermarket alternatives may be needed.
Switch and Electrical
The power switch and electrical components.
Parts to look for: Power switch, power cord, motor cord.
Common replacements: Switch (fails), power cord (damaged).
Common Wear Parts and Compatibility
Tires
Part: Rubber or urethane tires for 12-inch wheels. Compatibility: Fits all 12-inch Craftsman models. Also fits other 12-inch saws. Cost: 15 to 35 dollars per pair. Where to find: Sears Parts Direct, aftermarket suppliers, online retailers.
Blade Guides (Guide Blocks)
Part: Metal guide blocks for the upper and lower guides. Compatibility: Model-specific. Check the model number before ordering. Upgrade: Cool Blocks or Carter bearing guides may be available. Cost: 15 to 60 dollars.
Thrust Bearings
Part: Bearings behind the blade that prevent backward deflection. Compatibility: Model-specific. Read the bearing number for the correct replacement. Cost: 10 to 25 dollars each.
Drive Belt
Part: V-belt that connects the motor to the lower wheel. Compatibility: Model-specific. Measure the old belt for the correct replacement. Cost: 10 to 20 dollars.
Wheel Bearings
Part: Bearings in the upper and lower wheels. Compatibility: Model-specific. Read the bearing number for the correct replacement. Cost: 15 to 30 dollars per bearing.
Switch
Part: Power switch for the saw. Compatibility: Model-specific. Check the model number and part number. Cost: 15 to 25 dollars.
Table Insert
Part: The small plate around the blade slot in the table. Compatibility: Model-specific. Check the model number. Cost: 10 to 20 dollars.
Where to Find Parts
Sears Parts Direct
The primary source for Craftsman parts. Enter the model number to see the parts diagram and order parts. Some parts may be discontinued.
eReplacementParts
Another source for Craftsman parts. Search by model number for parts diagrams and ordering.
Aftermarket Suppliers
Olson Saw: Blades and Cool Blocks for the 12-inch saw. Carter Products: Guide upgrades for 14-inch saws (check compatibility with 12-inch models). Industrial bearing suppliers: Standard bearings by bearing number. Urethane tire suppliers: Tires in 12-inch size.
eBay
A source for hard-to-find and discontinued parts. Search for the model number.
FAQ
How do I find the parts diagram for my Craftsman 12-inch band saw?
Go to Sears Parts Direct or eReplacementParts and enter the model number (format 113.XXXXXX or 137.XXXXXX). The parts diagram will show every component with part numbers.
Where can I find the model number on my Craftsman 12-inch band saw?
Look for a label on the saw frame or column. The model number is usually in the format 113.XXXXXX or 137.XXXXXX. If the label is missing, measure the blade length (80 inches for a 12-inch saw) and search for 12-inch Craftsman models.
Are parts interchangeable between different Craftsman 12-inch band saw models?
Some parts are interchangeable (tires, blades) but many parts are model-specific (guide blocks, switches, bearings). Always check the model number before ordering.
What are the most common parts that need replacement on a Craftsman 12-inch band saw?
Tires, blade guides, thrust bearings, drive belt, wheel bearings, and switch. Tires are the most common replacement.
Can I use aftermarket parts on my Craftsman 12-inch band saw?
Yes, for blades, tires, and bearings. For model-specific parts like guide blocks and switches, check compatibility before ordering.
References
- Sears Parts Direct. “Craftsman 12-Inch Band Saw Parts Diagrams.” searspartsdirect.com.
- eReplacementParts. “Craftsman Band Saw Parts Diagrams.” eReplacementParts.com.
- Olson Saw. “Band Saw Blade and Accessory Guide.” Olson Saw Company.
- Carter Products. “Guide Upgrade Compatibility Chart.” Carter Products.
- Iturra Design. “Band Saw Parts Reference.” Iturra Design.
